VanStyle front window sun strip
220cm x 30cm with 55cm overlay
Due to the amount of variations in window screen sizes and placement choices you will be supplied with a plain sunstrip that you will need to fit before applying the sticker, this way you are able to vary sunstrip size and sticker placement to suit your vehicle
If you require a specific size please drop our instagram page a message @vanstyleltd
Fitting Instructions
You will need -
2 People, 1 Sharp Knife, 1 Squeegy
Do not apply in extremes of temperature...
Direct sunshine causes vinyl to gets softer meaning its easier to tear and ruin when it is hot!
1. Thoroughly clean the screen to remove all dirt, grit and grease (do not use a wax based product, as we want to remove the wax)
2. Measure down from each side at the top of the screen and apply masking tape, to mark the same length at each side of the windscreen. This will help ensure the strip is straight
3. Get your self a spray bottle of soapy water, spray plenty on the screen (this will make it easier to fit)
4. Remove backing paper from the sunstrip & apply to screen leaving the excess at the sides. The soapy water will allow movement of the strip to ensure it's placed centrally, squeegy out excess water and air bubbles from under the strip.
5. Trim off excess vinyl with a sharp knife.
6. Once fitted leave it to totally dry before driving off - if it isn't dry it isn't sticky (which allowed you to move it around), if it isn't sticky it will not last.
We share your passion