Plain sun strip
220cm x 30cm
If you require a specific size please drop us a message on our instagram page @vanstyleltd
You will need -
2 People, 1 Sharp Knife, 1 Squeegy
Do not apply in extremes of temperature...
Direct sunshine causes vinyl to gets softer meaning its easier to tear and ruin when it is hot!
1. Thoroughly clean the screen to remove all dirt, grit and grease (do not use a wax based product, as we want to remove the wax)
2. Measure down from each side at the top of the screen and apply masking tape, to mark the same length at each side of the windscreen. This will help ensure the strip is straight
3. Get your self a spray bottle of soapy water, spray plenty on the screen (this will make it easier to fit)
4. Remove backing paper from the sunstrip & apply to screen leaving the excess at the sides. The soapy water will allow movement of the strip to ensure it's placed centrally, squeegy out excess water and air bubbles from under the strip.
5. Trim off excess vinyl with a sharp knife.
6. Once fitted leave it to totally dry before driving off - if it isn't dry it isn't sticky (which allowed you to move it around), if it isn't sticky it will not last.